SHINOOK - Uniform heat distribution in rooms with high ceilings

It's too hot over here and too cold over there. Achieving a uniformly comfortable environment in workshops, warehouses, auditoriums and other rooms with high ceilings has always been a problem. With the Shinook you cna now have uniform heat distribution in buildings with high ceilings - 12' or more. How it works: The Shinook consists of a spiral thread, aluminum, rib-tube element through which hot water is circulated. A fan, with specially designed blades, is mounted above the rib-tube element. The fan blades are designed to gently push a continuos stream of warmed air down and out to the bottom perimeter of the room (A). The under pressure of the fan then causes the air to

circulate in both directions from the bottom perimeter (B). Cooled air is continuously drawn back to the Shinook for reheating and distribution while warm air is continuously pushed to the bottom perimeter of the room. As a result you get very uniform horizontal heat distribution in the bottom of the room. Fan blades are adjustable to match your room size. Advantages - Energy savings of up to 30% may be realized. In traditional air heating systems a small quantity of air is strongly heated. The hot air rises to the ceiling thus creating a large and extremely uneconomical vertical temperature difference. The Shinook continuously circulates a large quantity of air and only increases its' temperature slightly. The result is uniformly heated air throughout the entire room. You get a more comfortable heating system and lower heating costs. - Ceiling mounted the Shinook does not interfere with equipment placement in the room. - Low speed, high output fan is very quiet - Better horizontal air distribution increases comfort levels. No hot spots or cold draughts - Easily installed, long life and virtually maintenance free.

SPECIFICATIONS
Air capacity	Approx. 575,000 cu ft/hr
Air Stream	adjustable & controllable
Motor	1/3hp 120V; 860 rpm (variable)
Heat capacity	18.5 KW 56,000 BTU Water temperature 180°F
Water resistance	1.24 psi
Connection size at the water side	3/4" outside thread
Weight	57 lbs

Request more information